Announcement

Collapse
No announcement yet.

4tec cranks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4tec cranks

    Hi, i was wondering what if any treatment to you do to the crank after grinding an linishing, are they hardened at all
    be good,
    if you cant be good,
    be carefull
    if you can't be carefull,
    buy a pram

  • #2
    Re: 4tec cranks

    When grinding and welding on 4 stroke cranks, the hardening process is based on what type of wire is used when you weld. Specific wire material must be used to get the correct hardness.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: 4tec cranks

      so all your cranks are std bearing sizes
      be good,
      if you cant be good,
      be carefull
      if you can't be carefull,
      buy a pram

      Comment


      • #4
        Re: 4tec cranks

        In the past no, that is why we sell a bearing kit much like automotive kits. Things may change in the future and we possibly may sell a reconditioned crank that will use standard size but until then a kit is required to install a SBT new crank. All the BRP sea-doo factory cranks will use a standard sea-doo bearing.
        SBT Tech Support is here to help with your problems.
        We try to answer each question quickly and accurately.
        Please do not use Private Messaging for Tech Support, use the forums.

        Comment

        Working...
        X