Announcement

Collapse
No announcement yet.

94xp with F/A... Impeller Options

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 94xp with F/A... Impeller Options

    A while back I installed F/A's with a re-jet.

    I am still using the stock impeller and it's seen better days. What are my options as far as aftermarket? I want more holeshot / punch. I could care less about top speed but don't want to put too much load on the motor.

    Thanks!
    Dan Solie -
    04 RXP (the "Instigator")
    94 xp (freestyle mods)
    95 xp (faster than the 94)
    JS550 (the toothpick & the loaner)

    For FREE Seadoo Manuals - Click HERE!!!!

    http://www.tripleateam.com/water/v/U...ery/Dan-Solie/

    **** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****

  • #2
    Re: 94xp with F/A... Impeller Options

    Basically there are 2 choices, 15x20 swirl or 14x19 slimline. Either one will work well with your 657 engine.
    Bill O'Neal <br>
    WCM
    <a href="http://www.watercraftmagic.com"

    Comment


    • #3
      Re: 94xp with F/A... Impeller Options

      dan, i have a new, scat 15/19 mag swirl here that would fit your doo. it was done by dave, at impros. zig
      please visit my link with pics of my many parts for sale

      http://pg.photos.yahoo.com/ph/radracingpics/my_photos

      email radracingpwc@aol.com

      Comment


      • #4
        Re: 94xp with F/A... Impeller Options

        Thanks John... Bill O has first dibs on providing me one. I called him yesterday. If he doesn't have one, I'll give you an email...
        Dan Solie -
        04 RXP (the "Instigator")
        94 xp (freestyle mods)
        95 xp (faster than the 94)
        JS550 (the toothpick & the loaner)

        For FREE Seadoo Manuals - Click HERE!!!!

        http://www.tripleateam.com/water/v/U...ery/Dan-Solie/

        **** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****

        Comment


        • #5
          Re: 94xp with F/A... Impeller Options

          Dan, check the pitch on the one I sent...who knows?

          REG

          Comment


          • #6
            Re: 94xp with F/A... Impeller Options

            The NOVI SS prop?? That has all sorts of different pitches.. That, plus we are going to use that on Nick's 96XP Single pipe boat or the 951 96xp.
            Dan Solie -
            04 RXP (the "Instigator")
            94 xp (freestyle mods)
            95 xp (faster than the 94)
            JS550 (the toothpick & the loaner)

            For FREE Seadoo Manuals - Click HERE!!!!

            http://www.tripleateam.com/water/v/U...ery/Dan-Solie/

            **** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****

            Comment


            • #7
              Re: 94xp with F/A... Impeller Options

              Dan
              Dave is on sick leave until the 6th. So if Zig has a prop for you, talk to him if you need it sooner rather than later.
              Let me know if you buy one.
              Bill O'Neal <br>
              WCM
              <a href="http://www.watercraftmagic.com"

              Comment


              • #8
                Re: 94xp with F/A... Impeller Options

                Thanks Bill, I might just do that... Zig... Expect an email.

                Any word on the beach cart shipping yet?
                Dan Solie -
                04 RXP (the "Instigator")
                94 xp (freestyle mods)
                95 xp (faster than the 94)
                JS550 (the toothpick & the loaner)

                For FREE Seadoo Manuals - Click HERE!!!!

                http://www.tripleateam.com/water/v/U...ery/Dan-Solie/

                **** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****

                Comment


                • #9
                  Re: 94xp with F/A... Impeller Options

                  thanks bill.

                  i got your email dan, thank you. i will try to call you tomorrow.

                  bill the one i have is a scat c-75 15/19 lrg hub swirl. (140mm) is this what he needs?

                  zig
                  please visit my link with pics of my many parts for sale

                  http://pg.photos.yahoo.com/ph/radracingpics/my_photos

                  email radracingpwc@aol.com

                  Comment


                  • #10
                    Re: 94xp with F/A... Impeller Options

                    No it probably is not what he needs.
                    The Skat Trak Magnum impellors have a different depth to the face of the threaded area, so the impellor would not be spaced correctly in an oem pump. A C-75 impellor is for their C-75 magnum pump.

                    He needs a 14x19 Solas or Skat Trak straight blade impellor ( Solas CD series or Skat Slimline design ), or a 15x20 Skat Trak Swirl. Or he needs a repitched oem impellor by Impros.
                    Bill O'Neal <br>
                    WCM
                    <a href="http://www.watercraftmagic.com"

                    Comment


                    • #11
                      Re: 94xp with F/A... Impeller Options

                      I am using a stock pump.... John, call me anyways...

                      Bill O'. Maybe we'll just wait until Dave recovers.. It's not like I need this instantly..
                      Dan Solie -
                      04 RXP (the "Instigator")
                      94 xp (freestyle mods)
                      95 xp (faster than the 94)
                      JS550 (the toothpick & the loaner)

                      For FREE Seadoo Manuals - Click HERE!!!!

                      http://www.tripleateam.com/water/v/U...ery/Dan-Solie/

                      **** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****

                      Comment


                      • #12
                        Re: 94xp with F/A... Impeller Options

                        thank you bill. it was nice talking to you today.

                        sorry i couldn't help dan, maybe next time.

                        zig
                        please visit my link with pics of my many parts for sale

                        http://pg.photos.yahoo.com/ph/radracingpics/my_photos

                        email radracingpwc@aol.com

                        Comment

                        Working...
                        X