Announcement

Collapse
No announcement yet.

94 Tigershark starter bearing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 94 Tigershark starter bearing

    My starter bearing locked up last time out. Anyone know where I can buy just the needle bearing? The dealer wants $287 for a new starter and all I need is a $5 bearing. It measures 0.53 inches on the inside and 0.75 inches on the outside. Strange size. I called a bearing house and they could not help. The cage is messed up and I'm thinking of finding some needles from a U joint and putting them in with grease and eliminate the cage. Use about twice as many needles.

    Any one tried this before or knows where to get a bearing?
    Chuck

  • #2
    Is it a ball brg? Any visible #'s, then call back with the #.

    [ August 18, 2002, 11:17 AM: Message edited by: CaptToyota ]
    ***1100 Venture***<br />OE head mod-- by Riva Yamaha<br />Wiseco (+ .5mm)<br />True-welded crank<br />Riva F/A+ Jet kit<br />Boyeson Power reeds<br />Riva 1100 CDI<br />NGK plugs- BR8HS<br />R&D Aqua-Vein<br />Solas 14-21 Super Camber//Impros<br />Riva rideplate<br />Amsoil "AIO" @ 50:1 pre-mix, currently KLOTZ Ski-Craft<br />MOBIL-1 grease in the pump<br />Sears Diehard<br /><br /> Dream-meter shows 65---- GPS says 54.2 mph best, 9/14/02 @ 850 ft elevation

    Comment

    Working...
    X