SBT Jetski Engines, Parts & Accessories

Results 1 to 3 of 3
  1. #1
    Joined
    Jun 2003
    From
    South Africa
    Posts
    6

    Post

    Hi everyone,
    Bought my first Jetksi a 97 Daytona 770 about 3 weeks ago. I have a lot to learn and would appreciate any help.
    I am having problems with the trim and the bilge pump. Today I have disassembled the trim, greased the gears and check the operation by putting power directly from the battery. The trim works perfectly. I also disassembled the switch, and cleaned the contactors, but it does not want to work when I put everything back.
    With the bilge pump, when I press the switch, I hear a relay, but the pump does not spin, and the battery is fully charged. 2 weeks ago I had the same problem when I took the ski for its first run, and all of a sudden the bilge pump start working. The rev counter also did not work and all of a sudden it started to work. I have also checked the 4amp fuse that is located in a small black holder. I am sure it is a wiring or electronic component problem :

    1) If it is an electronic component, which components can it possibly be ?
    2) Must the engine be running or the ski be in the water for the trim and bilge pump to work ?
    3) The fact that they both not work, could it be related to a combined electric component such as a relay or rectifier failure ?
    4) I have noticed that when I open the black electrical box, there is a relay that clicks whn I press hte bilge pump button. There are wires that goes to 2 identical components which on the cover of the box says Circuit Protector. Each one also has a button which you can press, what are these things ?

    If anyone could help me with a wiring diagram, even just a basic one, or a short explanantion, I would really appreciate it. I live in a country where the jetski guys aren't interested in working on a tigershark and my only hope is either through these forums or trying an auto electrician. I am not an expert with electronics, but it does not look too complex.

    Thanks so much in advance.
    Anton.

  2. #2
    Joined
    Jun 2003
    From
    South Africa
    Posts
    6

    Post

    Sorry, I forgot to mention, the trim never worked, that is why I took it apart, I thought it might have been stuck.

  3. #3
    Joined
    Jun 2002
    From
    Ga
    Posts
    71

    Post

    I have a 95, the trim and pump only work when the ski is running. I have had a few problems with my pump also. Works / don't work. I check all my connectors, the pump works fine. My wife had the trim get stuck yesterday, it was the plug.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 94 Tigershark Daytona Bilge Pump & Trim
    By bigbadbrad in forum Tigershark
    Replies: 11
    Last Post: 09-02-2014, 05:37 PM
  2. Pump Cavitation w/ trim flat
    By ohell in forum Sea-Doo
    Replies: 1
    Last Post: 04-11-2005, 01:20 PM
  3. 2000 gsx rfi bilge pump help
    By AMARINSA in forum Sea-Doo
    Replies: 2
    Last Post: 09-14-2004, 11:33 PM
  4. 93xp Trim ring to pump arm
    By itsmarta in forum Sea-Doo
    Replies: 2
    Last Post: 07-12-2004, 02:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •