Announcement

Collapse
No announcement yet.

Daytona 770 water inlet question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Daytona 770 water inlet question

    There is a water hose that comes out of the engine just above the drive shaft, it is blocked off & I am wondering what it is for, can I put a permanent hose connection on it for flushing the engine after salt water use?

  • #2
    You should have a clamp and a rubber cap there - that is where you can attatch your flush kit.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      It does have a short piece of hose sticking out & a stainless bolt stuck into the end of it with a clamp holding it all togeather, I havn't got a flush kit & just poke the hose into the exterior water outlet (by the gas filler) to flush the engine, is this good or do I need a flush kit?

      Comment

      Working...
      X