Announcement

Collapse
No announcement yet.

Winterization, Sea-Doo 4TEC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Winterization, Sea-Doo 4TEC

    - Flush the ski
    http://server1.sbtontheweb.com/forum...ad.php?t=12000

    - Change the oil
    http://server1.sbtontheweb.com/forum...ad.php?t=13979

    - Remove the two fuel rail bolts, the rail and fuel injectors.

    - Spray Bombardier Lube for 3 seconds into each injector port.

    - Hold the throttle wide open and crank the engine over for 5 seconds.

    - Inspect the injector o-rings and replace if needed. Lube them with oil before reinserting them.

    - Use Blue Loctite on the rail bolts and torque to 7 ft/lbs.

    - Remove the engine cover and disconnect the ignition coil connectors.

    - Remove the coils, cleaning off any dirt.

    - Remove the spark plugs and spray Bombardier Lube down each spark plug hole for 3 seconds.

    - Reinstall the spark plugs and coils.

    - Apply Molykote 111 to the coil connector edges and reconnect them.

    - Reinstall the engine cover, it'll snap closed.

    - Hold the throttle wide open and crank the engine over for 5 seconds.

    - Remove and store the battery.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.
Working...
X