SBT Jetski Engines, Parts & Accessories

Results 1 to 5 of 5

Thread: 97xp 12v not

  1. #1
    Joined
    Jul 2005
    From
    Lake Lanier
    Posts
    4

    Default 97xp 12v not

    97xp no start,fuse in top position has no voltage,in /out

  2. #2
    Joined
    Feb 2004
    From
    New Jersey
    Posts
    2,601

    Default Re: 97xp 12v not

    pull the MEPM plugs check for water
    PRIDE IN SERVICE<br /> <img src="http://www.sbtontheweb.com/images/forposts/4609/1.jpg" alt=" - " />

  3. #3
    Joined
    Jul 2005
    From
    Lake Lanier
    Posts
    4

    Default Re: 97xp 12v not

    all is dry. i have no idea on terminal & fuse designation in referance 2 fuse (7.5a) in top position ...no v @ either side of fuse . lanyard on no beep ....lan on push strt button -one beep -no v @ start sol i do have basic skills (diag.-trbl sht) i could really benefit from a schm. & system overview.....i appreciate your time. or diagnostic flow chart ..... what are the required components to make this unit engine get spark???my knowledge on this magneto thingy and related has never been xplained 2 this 39 year old as you would an 8 yr. old .I cant wait 2 learn some new stuff!!!!!

  4. #4
    Joined
    Feb 2004
    From
    New Jersey
    Posts
    2,601

    Default Re: 97xp 12v not

    if you get a single beep with the key on , its possable that you just need to get the key programed to the ski . when did the problem start ?

    a quick test to check if most is working is to jump the relay . its in the little black box in the front next to the engine . if the engine cranks from there then you shoul dhave a bad relay or with one beep it could be the key is not set to the mpem .
    PRIDE IN SERVICE<br /> <img src="http://www.sbtontheweb.com/images/forposts/4609/1.jpg" alt=" - " />

  5. #5
    Joined
    Jul 2005
    From
    Lake Lanier
    Posts
    4

    Default Re: 97xp 12v not

    the unit does turn over when solenoid (relay,?,,, i will refer 2 it as solenoid) is bypassed or jumped
    .....

    .. i pierced solenoid trigger wires and could not aquire voltage...... will you please excuse
    my p.c./keyboard skills /( lack of )!..
    i need 2 know if this pwc is a p.o.s.........I am about 2 bypass this unyielding device.(memw..?????interlock??? ) Is there anyone out their whom might be so kind &
    help speed this process up ? where and what 2 jump...cut ....discard ...delete....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Primer for a 97XP
    By bcornish in forum Sea-Doo
    Replies: 17
    Last Post: 07-29-2005, 02:41 PM
  2. 2002 GTX DI 12V Low Alarm
    By patsplat in forum Sea-Doo
    Replies: 17
    Last Post: 05-21-2005, 02:46 PM
  3. Sea-Doo 4-TEC Codes
    By Technical Support in forum Technical Articles / F.A.Q.
    Replies: 10
    Last Post: 05-15-2005, 02:00 PM
  4. 12v bleed through stator
    By hard2hitch in forum Sea-Doo
    Replies: 4
    Last Post: 05-19-2004, 11:34 PM
  5. 97xp, still problems HELP!!!
    By pasha in forum Sea-Doo
    Replies: 15
    Last Post: 10-24-2003, 01:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •