Announcement

Collapse
No announcement yet.

Water Regulator?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Water Regulator?

    Why does my regulator have 3 washers under the spring? I do not see them on the parts manual. Also, is it possible to test it while attached to the hose and not in the water?

  • #2
    Re: Water Regulator?

    No you can't test on the hose. Someone may have snipped the spring too short - replace it to be sure.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: Water Regulator?

      Thanks.

      Comment


      • #4
        Re: Water Regulator?

        My 97 GSX also has 3 washers under the spring this was a Seadoo upgrade in 1997. So it is normal to have those 3 washers there.
        Later Chris
        Factory Pipe Spec 2 <br />愛&D Rec Head<br />意ovi 44XR Carburetors<br />FLY Flame Arrestors<br />感rimer Kit/Premix (40/1)<br />愛+D Aquavein Intake <br />Galindo Grips<br />愛+D 85/88 mm Hydro-force Nozzle<br />惹olas XO (16.5/24) Impeller<br />媲each House Sponsons<br />廈ydro-Turf Mats<br />嫂WD Bow Spray Deflector<br />廉armin Etrex GPS (61.5 MPH)

        Comment


        • #5
          Re: Water Regulator?

          My 97 GTX also has 3 washers under the spring. I took them off - and I have a performance problems now on 5000 RPM.
          Will put them back now. Thanks.

          Comment

          Working...
          X