The hull fitting that is on the back right if you are looking at it from the front has broken off. I have heard that I can just block this off anyway and that it wont matter. It will be a pain in the *** to repair to i was hoping i could just shoot some silicone in there. Anyone familiar with this or had a sproblem similar?
Announcement
Collapse
No announcement yet.
Broken hull fitting 650 sx
Collapse
X
-
Re: Broken hull fitting 650 sx
Also just to make sure i have my lines hooked up right. Looking at the ski from the front, The fitting on the back left goes to a hose to the back of the exhaust pipe. The fitting on the back right goes into a hose then the bottom of the manifold and the third goes from the side of the manifold and out the side of the ski.
Comment