I just bought a used 95 wave venture 700 and didn't have the ownwers manual. This is my first PWC and don't know much about them. I have been reading alot on this website and forum and it sounds like there is something that needs greased or oil in the jet pump area on some of these PWC. I looked at mine and don't see any grease zirks. Does anyone know if there is anything that I need to lube or grease on this waverunner?
I also noticed under the rear storage compartment, what looks like the muffler there is a piece of foam under the muffler and it looks melted. Is that normal or should there be something else under the muffler to suport it? It does have a rubber bungie cord over the top of it to hold it down. Maybe it just got hot once and melted the styrofoam under it? I havn't even run it long enough to know if the muffler get hot.
Thanks. If anyone knows anything else I should check out on this thing feel free to share.
I also noticed under the rear storage compartment, what looks like the muffler there is a piece of foam under the muffler and it looks melted. Is that normal or should there be something else under the muffler to suport it? It does have a rubber bungie cord over the top of it to hold it down. Maybe it just got hot once and melted the styrofoam under it? I havn't even run it long enough to know if the muffler get hot.
Thanks. If anyone knows anything else I should check out on this thing feel free to share.
Comment