Bryan, I bought a used 94 Raider 700. it is stock except a Mo-Flo K&N filter, and an Outerwears pre-filter. I converted it to pre-mix. the plugs have been very dark, even before the pre-mix conversion. I have read the text in the tech section for adjusting the carbs. Should there be any harm in running lean if I start by setting the screws to the factory settings prior to setting the carbs by the tech section? The fronts are set a small amount out from the factory setting. The rear high speed screw is out a lot. Thanks for all the help.
Announcement
Collapse
No announcement yet.
carb adjustments
Collapse
X
Comment