SBT Jetski Engines, Parts & Accessories

Results 1 to 2 of 2
  1. #1
    Joined
    Jun 2005
    From
    Salt Lake
    Posts
    5

    Default Oil injection bypass question.

    Hi, I have been working with the only PWC shop in town that knows anything about my 90 X2 that I am in the process of getting back on the water after a long time in the garage. One of the things the mechanic suggested, was that I bypass the injector and run premix. He stated he had a block off kit for a few bucks and that was all it would take. After I removed the reservoir and oil lines, he told me he didn't have the block off kit, and after all I really didn't need one, just leave the hose from the crank case to the bottom of the carb connected, and cap off the other end of the hose leading to the crank case from where the tank used to be.
    Does that sound right??
    When I called around to some other shops, no one knew what I was talking about, (granted, I live in Salt lake, and there aren't too many shops that are familiar with older Kawasakis apparently.) I finally got all the parts I need to get it on the lake, but I don't want to if the way he suggested isn't right.

    I am not as familiar with my ski as I should be, but I am learning a lot, (thanks to this site,) but I am going to ask a dumb question, what is the plunger located next to the exhaust manifold for? I am guessing some kind of bilge, what does it pump / release, and where does it go?

    Thanks, and awesome site guys!

    Travis

  2. #2
    Joined
    Mar 2004
    From
    WI
    Posts
    352

    Default Re: Oil injection bypass question.

    i would not recomend just disconecting your oil pump. you really need to remove it completely. i have block off kits here in stock for 10.00 + s&h if you want one.

    the plunger you are talking about is a crank case drain, incase you flood your motor, (with fuel or water). i would just leave it alone.


    zig
    please visit my link with pics of my many parts for sale

    http://pg.photos.yahoo.com/ph/radracingpics/my_photos

    email radracingpwc@aol.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Oil Pump and oil cable question
    By dwidders in forum Sea-Doo
    Replies: 0
    Last Post: 05-11-2006, 02:19 PM
  2. Changing oil injection lines
    By snowgoer in forum Sea-Doo
    Replies: 1
    Last Post: 01-30-2006, 12:15 PM
  3. Injection oil block off kit??
    By BullyJo in forum Sea-Doo
    Replies: 1
    Last Post: 09-13-2005, 10:49 PM
  4. Replies: 2
    Last Post: 08-10-2005, 12:37 PM
  5. Noob Oil Injection Question
    By kronk01 in forum Sea-Doo
    Replies: 1
    Last Post: 08-05-2005, 01:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •