flywheel puller 787 rfi

[dmf415]

Hi,
I have a standard universal puller, I realize now, the bolt holes to use a flywheel puller are metric, I tried 1/4 and 5/16 which didn't work. Anyone know what size are they?

[Ozzie Seadoo]

Re: flywheel puller 787 rfi

I think that they may be 8mm bolts for that flywheel (M8). Your flywheel puller probably came with 10mm bolts (m10) like mine did.

[Joseph]

Re: flywheel puller 787 rfi

The flywheel bolts are M8 1.5s You can use two washers if you need to make the heads big enough to hold in your puller.

[dmf415]

Re: flywheel puller 787 rfi

Thanks for the replies yall,
I took a guess and purchases some 8mm x 1.25 and 8mm x 1.00 80mm long bolts .
I bought my flywheel puller from kragen, it only cost 17.00 and came with SAE bolts.

I had to special order the metric bolts cuz most places like home depot, etc sell SAE bolts and I needed metric.

[dmf415]

Re: flywheel puller 787 rfi

I got my bolts and they didn't fit. I finally figured out, yes im an idiot, that the bolts are 7mm not 8, mine is 7mm x 1.0

doh!! hope this helps out others....i took a metric ruler and measured, LOL didn't think about doing that before, LOL