Installing a primer kit today on my 94 Montego. I had problems finding choke kit and decided to go the primer route. I assume the fittings are installed using JB? Or are they pressed into the carb?? Also, I am very new to Mikuni carbs...I have two lines that come from the tank. One has the fuel filter, the other does not. Is this just a return line? Where is the reserve line? Is there one (reserve line) on the 94 Montego? Should the kit be installed on the return line or main line?? What advantage does the main or return each have.....assuming that I have not reserve line?
Considering changing to a premix system. I am very concerned about the pump. I have seen posts citing a drill to check?? What about a high rev type tool instead (dremmel or air motor, etc). Could that do the trick to check for output? Does anyone know of a rebuild kit for the pump...is it even possible?
Thanks for any help that can be provided!!!
Considering changing to a premix system. I am very concerned about the pump. I have seen posts citing a drill to check?? What about a high rev type tool instead (dremmel or air motor, etc). Could that do the trick to check for output? Does anyone know of a rebuild kit for the pump...is it even possible?
Thanks for any help that can be provided!!!
Comment