Announcement

Collapse
No announcement yet.

ZXI R&D ride plate & solas intake grate

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ZXI R&D ride plate & solas intake grate

    Took out my 2000 zxi 1100 for the first time after installing R&d ride plate & solas intake grate. The porposing was better but not gone. The side to side stability is very bad. would sponsons help that problem? The R&D ride plate looks just like the OEM. Putting the OEM back on.Was thinking of a
    Aggressor ride plate & sponsons.

  • #2
    Re: ZXI R&D ride plate & solas intake grate

    You'll never get that hull to ride perfectly, it's just not a good design. Sponsons will help a bit further, but in the end you'll need to get used to working it if you are going to keep a ZXi around.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: ZXI R&D ride plate & solas intake grate

      Thanks for the info. would a aggressor ride plate help any?
      I have found a good deal on a 2001 Yamaha GP1200 2 seater. Do you have a info on those skis

      Comment


      • #4
        Re: ZXI R&D ride plate & solas intake grate

        According to James at Performance Engineering, ride plates won't help the porp. problem. What you need is the same thing I did, get a set of Worx sponsons and an extended steering nozzle. Day and night difference.

        Comment

        Working...
        X