94 Kawasaki 750 SS Crankshaft

[whagopian]

I'm looking for a replacement crankshaft for my 94 Kawasaki 750 SS. My engine ID is JT750AE007324 and I'm pretty sure it is the original motor. The wrist pins seem to measure 18mm. I've been told by a local shop that the engine should use 20 mm pins. Have I measured wrong or were some 750 built with 18mm wrist pins?

Help!
Wayne

[anzollo]

Re: 94 Kawasaki 750 SS Crankshaft

This sounds correct, however also measure the PTO end of the crankshaft. SBT will need to know what the distance across the PTO threads are. You will need to remove the PTO coupler from the crank to accuratly measure this.

[John Kubiak]

Re: 94 Kawasaki 750 SS Crankshaft

Go to this page, and answer the two questions:http://www.sbtontheweb.com/Merchant2...gory_Code=20-2