:emoticonc yeah buddy, imagine my surprise just got this thing and popped the seat off while i had it in the water running and squirt squirt all over the cylinder heads, its cracked on the center of the main exhaust manifold right where the center cylinder pipe converges into the main, looks like a bolt on the top manifold flange got over torqued.. or overheating who knows :emoticonc , any ways.. im gonna jb weld it, cleaned it with acetone and carb cleaner roughed it up good, now.. heres where i need opinions .. should i use a small amount directly on the crack, let it cure up a day and the try to slather on a nice encapsulating coat and the let it cure up a couple days , or just slather it on all at once and let it cure up good..
:emoticonr
and before you say get it actually welded, im trying not to hear that because the bolts on this thing are so salted and corroded from all the spray, they aint coming off w/o snapping the studs, then its pull the motor time.
:emoticonr
and before you say get it actually welded, im trying not to hear that because the bolts on this thing are so salted and corroded from all the spray, they aint coming off w/o snapping the studs, then its pull the motor time.
Comment