Announcement

Collapse
No announcement yet.

Mikuni pump gaskets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mikuni pump gaskets

    I watched the SBT videos on carb rebuilds and think I did well. Upon conclusion I was looking at the "spare parts" and noticed a pump gasket. Perhaps I missed it in the video (or maybe it was a different carb) but does the SBN 44 utilize two pump gaskets like it shows in my attachment? (Part number 1) If so, I need to disassemble it again!

    Thanks for your help!

    Angryblues
    Attached Files

  • #2
    Re: Mikuni pump gaskets

    I have seen it with and without that gasket. It will work either way but with it is the correct way.
    Providing mobile JetSki service to the Charlotte / Lake Wylie area.

    Comment


    • #3
      Re: Mikuni pump gaskets

      Based on the diagram, the 44 uses two gaskets.

      Comment


      • #4
        Re: Mikuni pump gaskets

        Originally posted by dank
        I have seen it with and without that gasket. It will work either way but with it is the correct way.
        Then I will disassemble and add the gasket. HOPE this works! :emoticont

        Thanks,

        AngryBlues

        Comment

        Working...
        X