Announcement

Collapse
No announcement yet.

Need Some Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need Some Help

    I Have A 96 Sea-doo With A 587 White Rebuild From Sbt Totaly Rebuilt The Carbs. Pop Off Set At 28.5, New Fuel Lines,clean Filter,fresh Gas And New Oil. New Spark Plugs Ngk-br8es Have Tryed Many Sets.ran Fine For About 20-to 30 Min On Flush Kit At 10 Min. At A Time 45 Min. To Cool Down.took To River Started Fine And Ran Fine For About 1/2 Mile And Then Died It Did Not Lock Up.but Would Not Restart For Nothin. Back At The Shop Checked Plugs And Replaced With New Set Checked Fuel Filter Ok.comption Is 135psi In Mag: Cyl. And 136psi In P.t.o. Cyl. Looking Down Into The Carbs With A Light I Can See A Mist Of Fuel As It Turns Over.trys To Run For About 3 To 5 Sec. Then Nothing. Good Hot Spark+ Fuel+ Comp= Run ???? Good Batt. Stays At 13+ Volts While Cranking Over....

  • #2
    Re: Need Some Help

    are you premixing or oil pump?

    Comment


    • #3
      Re: Need Some Help

      Put an ounce of premix down each carb and see if it will stay running longer on that. If so then you know it is a fuel system problem.
      Providing mobile JetSki service to the Charlotte / Lake Wylie area.

      Comment


      • #4
        Re: Need Some Help

        Is it possible that you spun the magnetor flywheel ? Sheared the woodruff key?
        Bill O'Neal <br>
        WCM
        <a href="http://www.watercraftmagic.com"

        Comment


        • #5
          Re: Need Some Help

          Originally posted by REDLINE
          Good Hot Spark+ Fuel+ Comp= Run ????

          Good Hot Spark that occurs at the proper time to ignite the air/fuel/oil mixture + Fuel (fuel and oil)+ Comp (air)= Run ????
          John Kubiak
          Powersports Technical Training Professional
          Las Vegas, Nevada
          Sea-Doo Tech 13736
          PWC Tech since 1988 (22 years)
          PowerSports since 1976 (34 years)
          NEVER BUY TIRES AT A "BLOW-OUT" SALE
          Please do not use Private Messaging, use the forums.

          Comment

          Working...
          X