SBT Jetski Engines, Parts & Accessories

Results 1 to 10 of 10
  1. #1
    Joined
    Aug 2005
    Posts
    10

    Default 96 sea doo xp oil block off question

    I'm trying to go premix for my 96 sea doo xp 782cc bombardier. The handout came with the block off kit ( from sbt) talks about removing rotary valve cover. why? the oil pump is located in the flywheel cover. Held by 2 screws. can i just remove the oil pump and the drive shaft for the pump and put the block off plate and leave the oil pump and all the oil lines to the pump and the lines from the pump to the rotary valve intact?

    I could disconnect the throttle cable to the pump, remove oil lines to the pump and remove the pump out. But when I removed the throttle cable from the oil pump, the accelerator cable gets a little slack and I don't like that. Is it ok to leave the pump still attached to oil lines and throttle cable?

    Need some advice please. What's the best oil to gas ratio for this motor?

  2. #2
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,545

    Default Re: 96 sea doo xp oil block off question

    http://server1.sbtontheweb.com/forum...ad.php?t=15142


    Is this the guide you received? It covers everything. Let me know if what you have is different.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

  3. #3
    Joined
    Aug 2005
    Posts
    10

    Default Re: 96 sea doo xp oil block off question

    Yes. That's the handout came with the oil pump block off kit. If you read the first page, it talks about removing the rotary valve cover from the engine. I'm confused. Is this handout written for many xp models? I don't see the reason to go that far. Once you remove the oil pump from the flywheel cover, no oil will flow to the rotary valve cover on the 96 sea doo xp 782cc model. Correct me if I'm wrong here.

    Thanks

  4. #4
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,545

    Default Re: 96 sea doo xp oil block off question

    Read it more carefully - it's clearly spelled out, even on the first page.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

  5. #5
    Joined
    Aug 2005
    Posts
    10

    Default Re: 96 sea doo xp oil block off question

    I saw what it said at the end of the 1st page. I wasn't quite sure to do all of the instructions or not. Anyway thanks for the quick response.

    By the way it's quite clear to me that to blok off the oil pump for 96 sea doo xp, you don't need a block off kit. All you have to do is to remove the oil pump(2 screws) pull the drive shaft to the oil pump out and put the oil pump back in place. Without the oil pump drive shaft, no oil will flow to the rotary valve covers.

    Comments are welcome

  6. #6
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,545

    Default Re: 96 sea doo xp oil block off question

    You still need to block off the lines, you risk an air leak into the intake.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

  7. #7
    Joined
    Jan 2021
    From
    El Dorado Hills, CA
    Posts
    2

    Default дай ка брат тебя обнять

    сказать по чести хазарская чепухой http://www.musicforums.ru/klavishnik...ex.php?id=1674 akqWgXPk

  8. #8
    Joined
    Sep 2020
    From
    Panama
    Posts
    116

    Default авто телевизор

    Долго искал и наконец нашел действительно полезный сайт про авто Автомобильное законодательство, новости и законы пдд

  9. #9
    Joined
    Sep 2020
    From
    Panama
    Posts
    116

    Default авто из сша минск

    Привет нашел классный сайт про автомобили много полезной информации Новости автопутешествий

  10. #10
    Joined
    Sep 2020
    From
    Panama
    Posts
    116

    Default автомобиль синоним

    Можете глянуть по ссылке хороший сайт про автомобили Техническое обслуживание автомобилей, ремонт и эксплуатация

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Sea Doo GTX 787 water hose question
    By HC1949 in forum Sea-Doo
    Replies: 4
    Last Post: 07-05-2007, 05:16 PM
  2. Sea Doo 96 GTX rubber bumper question
    By HC1949 in forum Sea-Doo
    Replies: 3
    Last Post: 05-06-2005, 12:22 PM
  3. Where to buy Synthetic Sea Doo Oil Online?
    By dundeels in forum Sea-Doo
    Replies: 1
    Last Post: 07-20-2004, 10:45 PM
  4. Sea Doo / Rotax 2 cycle Oil
    By smitty in forum Sea-Doo
    Replies: 2
    Last Post: 08-14-2001, 12:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •