Announcement

Collapse
No announcement yet.

starting the new 650

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • starting the new 650

    Would it hurt to start my new 650 engine on the trailer before I put it in the water.The lake is 1 hour away and I wanted to make sure it fired up at the house before I drove all the way to the lake.
    I do not have a flush kit so it would be starting it and running with out water in it.And if it is ok to do what is the max time I can run it.I was thinking no more than 5 seconds.
    I was looking at breakin and it said idle in water for 10 min. and then vary throttle to 20% for 30 min.does that mean go 20% for 1 min then let off or more often
    Thanks Kenny

  • #2
    Re: starting the new 650

    You can do that for up to 15 seconds.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: starting the new 650

      It sounds so good!!! kinda like a race car engine with a wild cam.
      I can't wait till Sunday to put it in the water.
      Thanks SBT!!!

      Comment

      Working...
      X