Announcement

Collapse
No announcement yet.

Electrical Connections

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Electrical Connections

    Hi, this is my first ever thread. I hope someone can help me.

    I have a '98 XL1200 and the LCD meter assembly (speedo, fuel etc) have died.

    I can confirm the meter assembly needs replacing as another XL's gauges have been pluged in and it's fine.

    The Serial Number of my PWC is YAMA3082K798 (taken off the rear boarding platform tag)

    The Part number (I think) off the meter assembly (or instrument gauge cluster) is GP8-22 7 9 K

    I'm looking at a used set (as I plan to trade up on a new ski later). What I want to know is if a set other than a GP1200 gauges will fit and work?

    I see used sets in ebay but what I'm unsure of, is if these meter assemblies are different from US to non-US (or exported) models from Japan?

    My connectors are as follows
    Loom 1 connectors:
    1 x semi-transparent 2 pin - wires:dark pink & light brown
    1 x brown 2 pin - wires: pink/yellow stripe & light brown (joined to above wire)
    1 x white 4 pin - wires: black, red, green, light pink

    Loom 2 connectors:
    1 x blue 1 pin - wires: red/black stripe
    1 x blue 1 pin - wires: gray
    1 x white 3 pin - wires: yellow, black, red/white stripe
    1 x white 2 pin - wires: black, blue
    1 x green 2 pin - wires: black, white/black stripe
    1 x black 2 pin - wires: blue/red stripe, blue/black stripe.

    Can anyone help me?

    Thanks.

  • #2
    Re: Electrical Connections

    The SBT Forums are for SBT Product Support ONLY. For all general PWC support/discussion, please post on www.pwctoday.com.


    Thank you - SBT Mgt.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment

    Working...
    X