Well I did it I put my GT in the water without the plugs in. Long story short, No spark after that. I pulled the plugs turned over the motor (no water) I found water in the fly wheel box area. I had my coil checked and it was ok. Now the bad part :emotredf when I came home and looked in the hull I saw a three prong connecter laying in the bottom. It is part of the magneto assy.
From the pic's it looks like I need to replace the Armature plate assy. How hard is that or could I just splice the wire's back together?
From the pic's it looks like I need to replace the Armature plate assy. How hard is that or could I just splice the wire's back together?
Comment