SBT Jetski Engines, Parts & Accessories

Results 1 to 2 of 2
  1. #1
    Joined
    Sep 2006
    From
    Florida
    Posts
    6

    Default 717 water flow/pressure for cooling

    Trying to revive a 1998 GTi Seadoo. The unit runs great - little effort was required.

    I can maintain adequate cooling using the backflush port (I can see water attempting to flow from the pisser by looking at the hose inside motor compartment, but not enough pressure to ever get flow out and water is certainly leaving the exhaust port). Went to take a water test drive, NO water ever came through pisser and the motor was very HOT to the touch after a brief idle.

    I know the intake water hose is clear from venturi to the top of motor (confirmed by back flush through hose). I know I have good flow through the engine using the "official" factory backflush point and removing the hose on the top front of the engine supplying the tuned pipe. What I don't know is how the water is pressurized through the engine under normal run conditions and how to diagnose issues - from top intake hose to the discharge of the top?? How is water pressure developed?? HELP... :emoticonb

  2. #2
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,545

    Default Re: 717 water flow/pressure for cooling

    The SBT Forums are for SBT Product Support ONLY. For all general PWC support/discussion, please post on www.pwctoday.com.


    Thank you - SBT Mgt.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Preseason check list!!
    By jcar25 in forum Sea-Doo
    Replies: 4
    Last Post: 08-22-2021, 05:49 PM
  2. Please Help . Water inside a 650 Kawa Engine
    By clydewater in forum Kawasaki
    Replies: 0
    Last Post: 09-15-2005, 08:32 PM
  3. Water inside a 650 Kawasaki
    By clydewater in forum Kawasaki
    Replies: 0
    Last Post: 09-12-2005, 04:29 PM
  4. Tigershark Monte Carlo 1000 - Water :(
    By redr2 in forum Tigershark
    Replies: 1
    Last Post: 09-28-2004, 09:30 AM
  5. interesting theory on water injestion on 951
    By BEECHFRONT in forum Sea-Doo
    Replies: 6
    Last Post: 09-13-2001, 08:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •