Announcement

Collapse
No announcement yet.

carb question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • carb question

    Is there any reason why carbs from a 900 zxi would not work on a 1100 zxi, and if they would is there anything such as jets or whatever that needs to be changed? If it needs rejetted what size jets for the main and pilot jets? thanks for any help
    Last edited by dieman_1; 02-11-2007, 07:50 PM.

  • #2
    Re: carb question

    Yes they need to be rejetted. You can find the correct jets and even buy them at www.buykawasaki.com
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: carb question

      Could you tell me what size jets?

      Comment


      • #4
        Re: carb question

        I don't know off hand but you can look it up there.
        SBT Tech Support is here to help with your problems.
        We try to answer each question quickly and accurately.
        Please do not use Private Messaging for Tech Support, use the forums.

        Comment


        • #5
          Re: carb question

          Went there and checked it out, just a bit confused. The setup for the carbs on the 1100 are 125, 120, 120 the setup for the 900 are 115, 105, 110. Should I go with the 1100 setup or should I go with something more like the 900 setup such as 125, 115, 120? If somebody else has taken the carbs off a 97 900 zxi and put them on a 1100 zxi I would value your input here on what you used for the main jets. Thanks all for the help

          Comment

          Working...
          X