Announcement

Collapse
No announcement yet.

oil injection question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • oil injection question

    I just bougth 2 oil block off kit from SBT, and everything when fine
    but my ? is , do the oil have to flow back to the oiltank or after is
    full by gravity stay like that , because i dont see movement back to
    the tank. thanks.
    att.
    GEORGIE (OCALA FL.)

  • #2
    Re: oil injection question

    If you mean the two large lines going to the case, it only circulates at wide open throttle.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: oil injection question

      It really does not seem to circulate at all at any rpm. At least it doesn't when I watch it on the dyno at all rpms. It just sits there. When hot, it moves up the line an inch or so, but never really "circulates". It doesn't need to circulate. But that is when we just connect the two lines together in the middle, no oil tank.
      Bill O'Neal <br>
      WCM
      <a href="http://www.watercraftmagic.com"

      Comment


      • #4
        Re: oil injection question

        Thanks for your help.

        Comment

        Working...
        X