2000 gp1200r

[Schwindt]

I just bought a used 2000 gp1200r w/ 122hr. on it. I haven't been able to find any information about recalls for this specific year/model. Are there any that I should know of and/or are there any faulty parts that should be replaced.

Also, is it important that I use Yamalube or is this just manufacturer hype?

Any info is much appreciated! Thanks in advance.

-Aaron

[Schwindt]

Re: 2000 gp1200r

Also wanted to add that the ski is all stock and I would prefer to keep it as reliable and as stock as possible w/ the exception of any faulty stock parts that must be replaced.


thanks again!

-Aaron

[skraggy]

Re: 2000 gp1200r

Upgrades that need to be done to that model.

Wave eater clips for powervalves, available at SBT
http://www.sbtontheweb.com/Merchant2...tegory_Code=46

And remove the catcon and replace it with a D-plate,
RIVA part number RY1819

Come over to www.pwctoday.com for more help.
You will get quicker responses there....and that site is owned by SBT also.

[sprink701]

Re: 2000 gp1200r

also a pump seal kit, it will greatly reduce cavatation and extend the life of you impeller

[skraggy]

Re: 2000 gp1200r

I missed the Oil part.

I use Yamalube only in my Yami's...it is not too much more expensive that other brands of equal quality.If you do not use the yamalube,at least use a good synthetic blend...do not use straight tcm3 or plain 2-cycle oil,especially in that motor. Oil is the most critical product that goes into your motor.