Announcement

Collapse
No announcement yet.

carb settings?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • carb settings?

    I have looked at the stock carb settings in sbt's tech section and its listed as 1 1/4 +/- 1/4 for the low speed but my manual say 2 turns out. Whats the better setting?

  • #2
    Re: carb settings?

    No, the OEM Manual does not say 2 turns out.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: carb settings?

      In my manual I have on disc it does
      Last edited by gsxr800; 05-25-2007, 03:40 PM.

      Comment


      • #4
        Re: carb settings?

        Use the file attachment, not image tag to upload something from your hard drive - I removed your bad link.

        I double checked the 1998 manual and yes you are right it does say 2 turns out that year, I was wrong - sorry!

        Use the 2 turns out for your model.
        SBT Tech Support is here to help with your problems.
        We try to answer each question quickly and accurately.
        Please do not use Private Messaging for Tech Support, use the forums.

        Comment


        • #5
          Re: carb settings?

          Thanks!!

          Comment


          • #6
            Re: carb settings?

            The confusion about settings is because the 1998 white motors had smaller LSJ's than the 1998 grey motors. Depends upon wether or not your carbs have 180 LSJ's or 182.5 LSJ's in them.........

            If you have carbs from a white motor, use 2 turns out as your starting point.

            If you have carbs from a grey engine, use 1 3/4 turns out.
            Bill O'Neal <br>
            WCM
            <a href="http://www.watercraftmagic.com"

            Comment

            Working...
            X