SBT Jetski Engines, Parts & Accessories

Results 1 to 1 of 1
  1. #1
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,555

    Default Honda Code Reset

    If you have forgotten your code or bought a ski from someone without the code, here is how to reset it.

    1. Remove the storage box.
    2. Disconnect the combination meter 8P gray connector.
    3. With the MODE and SET buttons pushed, fit the safety lanyard clip to the base of the engine stop switch and hold the MODE and SET buttons for at least 5 seconds. The ID No. mark and the first digit of the ID number come on and start blinking and the warning buzzer beeps.
    4. Push the ID No. button until 9 is displayed.
    5. Push the ID SET button. The second digit starts blinking.
    6. Push the ID No. button until 9 is displayed.
    7. Push the ID SET button. The third digit starts blinking.
    8. Push the ID No. button until 9 is displayed.
    9. Push the ID SET button. The combination meter shuts off.
    10. Pull the lanyard off. Reconnect the harness terminal and install storage bin. Reconnect the lanyard. The system is now unlocked.
    ________
    Last edited by Jeremy-SBT; 03-08-2011 at 04:48 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Start Code Reset
    By asanders72 in forum Yamaha
    Replies: 2
    Last Post: 06-03-2012, 11:25 AM
  2. Code on GTX-RFI Limited
    By benallo in forum Sea-Doo
    Replies: 2
    Last Post: 03-26-2008, 07:37 AM
  3. Security Code Reset on Virage MFI
    By Jimbo-Aus in forum Polaris
    Replies: 4
    Last Post: 01-28-2008, 07:31 AM
  4. FS/FT 86 Honda VFR750F Interceptor
    By JSJ in forum PWC's For Sale
    Replies: 0
    Last Post: 09-17-2005, 03:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •