94 sl750

[pink63impala]

hello, new here
i picked up 94 sl750 from a buddy
it had a bad engine .which he removed and tore down.lomg story shirt, ive got it rebuilt and trying to reinstall everything,ive got the engine bolted down in the hull so far.
my first question is how are teh choke and throtte cables run? i cant seem to figure a way to run them to where they even come close to the carbs. after i figure that out ill move to question #2 !!
any other tips apreciated

[dierdorf]

Re: 94 sl750

Before you go any further.......You will need to un-bolt the engine and have the jet pump aligned with the engine, otherwise you will strip out the drive shaft.

Contact a Polaris dealer for alignment.

[pink63impala]

Re: 94 sl750

Before you go any further.......You will need to un-bolt the engine and have the jet pump aligned with the engine, otherwise you will strip out the drive shaft.

Contact a Polaris dealer for alignment.

thanks for the advise. the shims werent removed from the mounts , so i should be ok, you think?