SBT Jetski Engines, Parts & Accessories

Results 1 to 5 of 5
  1. #1
    Joined
    Dec 2003
    From
    Raleigh, North Carolina
    Posts
    55

    Post

    On the carb settings chart is says:

    High Speed 5/8(M), 1-1/8(P) +/-

    What do the (M) and (P) stand for?

  2. #2
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,545

    Post

    (M) Mag, front where the magneto is
    (C) Center
    (P) PTO, rear, where the PTO is
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

  3. #3
    Joined
    Mar 2006
    From
    San Antonio TX
    Posts
    15

    Default Re: Stock Carb Settings - 701

    My high is set at 1/2 turn out and the black screw on the other side is 1 full turn out.I Have a 1990 Waverunner III 650 engine.
    Is this the right settings.
    This is a new SBT engine I just bought and have not taken it out on the water yet.Reading the forms I see that if it is not set right I can mess my engine up and I do not want to pull it again.I also put a block off plate and use mix oil now.
    Please advise me what is the correct settings.
    Thanks Kenny

  4. #4
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,545

    Default Re: Stock Carb Settings - 701

    On a 650, both screws need to be out 1 1/2 turns.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

  5. #5
    Joined
    Sep 2020
    From
    Brunei Darussalam
    Posts
    37

    Default электронный авиабилет как им пользоваться

    Любишь путешествовать и не знаешь какую страну посетить следующую на сайте kruiztransgroup.ru много обзоров по странам мира

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stock Carb Settings
    By ZiGz in forum Polaris
    Replies: 3
    Last Post: 08-12-2021, 05:07 PM
  2. 96 WaveRaider 760 Stock Carb Settings
    By snyfmly in forum Yamaha
    Replies: 7
    Last Post: 06-04-2021, 05:51 PM
  3. 770 SBT Engine specs use stock carb settings?
    By hkon in forum Tigershark
    Replies: 1
    Last Post: 07-13-2006, 05:57 PM
  4. 701 Carb Settings
    By marz831 in forum Yamaha
    Replies: 1
    Last Post: 03-08-2005, 09:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •