Announcement

Collapse
No announcement yet.

96 XP Steering Cable

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 96 XP Steering Cable

    I had to replace my broken steering cable part # 277000289, I bought an aftermarket WSM cable part # 00204801. It is the exact size and length but the threaded ends on the WSM cable are slightly too large for my end fittings.

    I wanted to know if the cable for the 96 xp has a different thread size vs the other similar seadoo hulls. I've tried 2 of these WSM cables that are supposed to be direct replacements for the 277000289 cable. I'm starting to think that it's just because its an aftermarket product vs oem. Do I need to get the oem or is there something funny about the 96 xp cable?

  • #2
    Re: 96 XP Steering Cable

    You should contact WSM and speak to them about this issue, We would not have any info on aftermarket cables v.s. O.E. Tom SBT tech.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: 96 XP Steering Cable

      Is there anything different for the cable for the 96 xp vs the other models?

      Comment


      • #4
        Re: 96 XP Steering Cable

        I dont know we dont sell cables. Sea-doo has tons of different part numbers for their cables. Good luck.
        SBT Tech Support is here to help with your problems.
        We try to answer each question quickly and accurately.
        Please do not use Private Messaging for Tech Support, use the forums.

        Comment

        Working...
        X