I have a 2007 AR210. The right motor is running fine, but not pushing water like it should and my boat is just going in circles. I looked at the coupler and it looks fine, the impeller seems to be ok and there is no trash in the grate or on the shaft...What am i missing? Boat was running fine yesterday, idled out past the no wake gave it throttle and went about 100 feet and took a turn, like i said the motor is still running, and coupler looks fine. Any help to save my vacation would be appreciated!!!!
Announcement
Collapse
No announcement yet.
On Vacation need AR210 pump help!
Collapse
X
-
Re: On Vacation need AR210 pump help!
Splines stripped between the intermediate and drive shaft?
This means that the coupler looks fine, however the coupler is not connected to a drive shaft, it's connected to the intermediate shaft and that one is connected with splines to the actual drive shaft.
Comment
Comment