SBT Jetski Engines, Parts & Accessories

Results 1 to 5 of 5
  1. #1

    Default Sea-Doo 4 Stroke Engines Losing Engine Coolant

    In the past, a few customers have contacted us because their 4-Stroke Sea-Doo is mysteriously consuming engine coolant. We have found that the two hoses inside the hull that are connected to the ride plate/heat exchanger are the hoses that are leaking. The hose clamps that are used will rust and break and when pressure is built up from the cooling system. The antifreeze will then push past the ride plate nipples and hoses. No evidence of coolant can be found in the hull because it is bilged out by the self-bailing system in the ski. Attached are a few pictures of a failing clamps and its location. Replace the clamps with a good marine grade full stainless steel clamp. This should help prevent "mysterious" coolant loss.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image 1.jpg 
Views:	4757 
Size:	359.3 KB 
ID:	3027   Click image for larger version. 

Name:	image 2.jpg 
Views:	4529 
Size:	236.5 KB 
ID:	3028   Click image for larger version. 

Name:	Image 3.jpg 
Views:	6647 
Size:	350.9 KB 
ID:	3029  
    Last edited by Ericka-SBT; 02-07-2009 at 07:06 AM.
    Ericka Buczkowski
    SBT

  2. #2
    Joined
    Oct 2007
    From
    Key West
    Posts
    198

    Default Re: Sea-Doo 4 Stroke Engines Losing Engine Coolant

    Another one is the ride plate leaking, around the screws which hold the cover plate on the ride plate, you will never find coolant in the unit, make always sure that the sink is still on the plate, this is a common problem if the ski is used in salt water.

  3. #3
    Joined
    Mar 2003
    From
    SBT
    Posts
    21,555

    Default Re: Sea-Doo 4 Stroke Engines Losing Engine Coolant

    Yes I have seen antifreeze leak around the Zinc mounted to the ride plate, thats easy to spot, Green fluid on the ground under the ski or on the ride plate. It is hard to spot the leak in side the hull with all of the items covering the hose clamps.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

  4. #4
    Joined
    Feb 2010
    From
    So Cal
    Posts
    4

    Default Re: Sea-Doo 4 Stroke Engines Losing Engine Coolant

    Question, I have two SD 2007 RXT's, is there a specific BRP coolant I must use or can I just use a generic automotive type. Thanx for the input.

    Patrick

  5. #5
    Joined
    Aug 2004
    From
    Olympia, WA
    Posts
    3,629

    Default Re: Sea-Doo 4 Stroke Engines Losing Engine Coolant

    Auto is fine.. I use 50/50 mix
    Dan Solie -
    04 RXP (the "Instigator")
    94 xp (freestyle mods)
    95 xp (faster than the 94)
    JS550 (the toothpick & the loaner)

    For FREE Seadoo Manuals - Click HERE!!!!

    http://www.tripleateam.com/water/v/U...ery/Dan-Solie/

    **** Please do not PM me. I don't do PM's.... Please post your question on the correct forum so that all can see and learn. Thanks! ****

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1988 Sea Doo Engine Problem
    By bojoe in forum Sea-Doo
    Replies: 3
    Last Post: 07-15-2005, 12:32 PM
  2. Sea Doo Engine Paint
    By Dan99XPL in forum Sea-Doo
    Replies: 1
    Last Post: 06-07-2005, 11:40 AM
  3. Sea Doo engine longevity
    By Dino Doo in forum Sea-Doo
    Replies: 11
    Last Post: 09-22-2004, 11:57 AM
  4. Sea Doo 951 Silver Engine
    By speedfrk in forum The SBT Experience
    Replies: 1
    Last Post: 10-20-2003, 04:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •