Announcement

Collapse
No announcement yet.

Changing the driveshaft bearing housing on a 2003 Honda Aqua Trac R-12X

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Changing the driveshaft bearing housing on a 2003 Honda Aqua Trac R-12X

    How hard is it to change the driveshaft bearing housing assembly on a 2003 Honda R-12X turbo. There is a rubber hose that runs from the grease fitting down to the housing and where the grease fitting goes into the housing, it leaks water and almost caused the ski to sink. Any suggestion, help? I do a lot of my own mechanical work. I have restored several classic Corvettes so I am pretty mechanically incline.

    thanks
    Barry

  • #2
    Re: Changing the driveshaft bearing housing on a 2003 Honda Aqua Trac R-12X

    Get the factory manual it will explain how to remove the jet pump and drive shaft then the seal assembly.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment

    Working...
    X