Announcement

Collapse
No announcement yet.

does new drive line bearing need to be pressed on shaft?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • does new drive line bearing need to be pressed on shaft?

    I have a yamaha vx 110 deluxe i ordered a new shaft and driveline bearing kit. It does not seem like it will slide up into place far enough. This was confirmed when i put the engine back in and could not line up the hole on the engine mounts.
    My question is: does the bearing kit need to be pressed on or can i tap it into place?

    Thanks in advance for any help.

  • #2
    Re: does new drive line bearing need to be pressed on shaft?

    You should press it in place, the shop manual tells you exactly how far you should press it on.

    Comment

    Working...
    X