Announcement

Collapse
No announcement yet.

'01 Ultra 150 oil Injection removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • '01 Ultra 150 oil Injection removal

    I would like to remove oil injection...does anyone know what the oil levels need to be in front and rear cover? I heard I need to run a line between two nipples, but before I do that that I can fill the front and rear covers so bearings will be lubricated.
    Thanks!
    Mike

  • #2
    Re: '01 Ultra 150 oil Injection removal

    The ultra 150 needs major modifications done to the inside of the crank case to run a pre-mix system. It is not recommended for the average guy to take on as a project.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: '01 Ultra 150 oil Injection removal

      I am a technician, this is my personal ski. I've been told that as long as the counter bearings have sufficient oil, that I can attach a line from front to back fitting...what else would need to be done...I've already disabled my pump...so at this point I need to go ahead with it. thanks for any help you may be able to give me.

      Comment

      Working...
      X