Announcement

Collapse
No announcement yet.

'02 1100 ZKI Wear Ring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • '02 1100 ZKI Wear Ring

    Does the pump on this ski have a wear ring? I took the pump off the ski and I dont see any wear ring. I also do not see a spot to purchase a wear ring on SBT.
    Also I would like to take the Impeller out. I have one end of the impeller Rod in a vise. I am trying to turn the other end by placing a screwdriver through the hole on PTO side of the impeller. It does not want to budge. Is this reverse thread or something?


    PS I realize I misspelt ZXI

  • #2
    Re: '02 1100 ZKI Wear Ring

    OK OK. I got the pump all apart.


    I should be able to get the bearings pressed out without much difficulty. It needs replacement because the bearing in the pump is loose .
    How do I know if I need the wear ring replaced. It looks good mostly except for the spot where the set screw is. In that spot it has a slight inward bulge where the prop rubs.

    Comment

    Working...
    X