the engine would not restart after running for the first 30mins. Everything turns over but its not starting up. For the break in i'm using a 32:1 mixture and following the recommended break in procedure as SBT recommends. The carb is brand new, and all fuel lines, filter, and selector valve have been replaced. When I take the plugs out the plugs are wet with fuel.... I have spark with "checked with an inline spark checker" each plug. Checked voltage @ battery while cranking and every thing reads fine.
Compression is good.
I have no idea what the prob is or maybe I'm just overlooking something simple. I just don't understand why it doesn't start. WHen I originally started it, it fired right up...
I'm sure I have fouled plugs but I did put in a new set and nothing...
Compression is good.
I have no idea what the prob is or maybe I'm just overlooking something simple. I just don't understand why it doesn't start. WHen I originally started it, it fired right up...
I'm sure I have fouled plugs but I did put in a new set and nothing...
Comment