Announcement

Collapse
No announcement yet.

I just purchased a new SBT engine. DUring the break in procedure...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I just purchased a new SBT engine. DUring the break in procedure...

    the engine would not restart after running for the first 30mins. Everything turns over but its not starting up. For the break in i'm using a 32:1 mixture and following the recommended break in procedure as SBT recommends. The carb is brand new, and all fuel lines, filter, and selector valve have been replaced. When I take the plugs out the plugs are wet with fuel.... I have spark with "checked with an inline spark checker" each plug. Checked voltage @ battery while cranking and every thing reads fine.
    Compression is good.
    I have no idea what the prob is or maybe I'm just overlooking something simple. I just don't understand why it doesn't start. WHen I originally started it, it fired right up...
    I'm sure I have fouled plugs but I did put in a new set and nothing...
    Last edited by metalbox; 07-25-2010, 11:16 AM. Reason: forgot a word

  • #2
    Re: I just purchased a new SBT engine. DUring the break in procedure...

    What engine do you have?
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: I just purchased a new SBT engine. DUring the break in procedure...

      Yamaha 650

      Comment


      • #4
        Re: I just purchased a new SBT engine. DUring the break in procedure...

        I just called SBT, just waiting on a call back. So far everyone there has been very friendly!

        Comment

        Working...
        X