'96 GTX Won't start

[lorider007]

Another project ski!
This ski has been sitting for about a year now. It is still winterized from last season. It will crank but will not start. i put new plugs and have a spark. I took the gas line of the top of the carbs and it was dry. Do I just need to prime the Fuel lines? If so how do i do that? Or what else could be Wrong?
Thanks

[Technical Support]

First, completely drain your fuel system, then refill with fresh fuel. Then take your return line off your carbs and blow through it, to pressurize the system. Catch the fuel coming out of the carb and let enough flow through that you know the fresh is now in the system.

[Bill O'Neal]

An easier way to prime a motor is removing the spakplugs and pour some gas ( only about 1 tablespoon ) into the motor.