Hellow i picked up a comp/ polaris 1995 ski comp. With a bad motor number 3 cly. Blown piston and bent rod but i checked somethings out that where not there the orfice is missing in the fuel line also no thermostat in cooling rail and the water box cross over hose had blisters inside should i put the missing parts in the ski at reassembly also sbt tech. Informed me to change the carbs out with a set of 780 carbs block oil pump and ad high volume fuel pump the motor i will use in place of bad one is a 650 rebuilt short block ti should work fine never owned a polaris i hope that am going in the right direction here if any body can help me out that would wonderful thanks mooseman
Announcement
Collapse
No announcement yet.
Ski rebuild
Collapse
X
Comment