Announcement

Collapse
No announcement yet.

new sbt 155mm liner wear ring loose as falls st8 through

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • new sbt 155mm liner wear ring loose as falls st8 through

    new sbt 155mm yamaha wearing and housing the liner is loose slides in and out and all around? it's not tight at all i can see it just spinning in the housing?
    thought they where meant to be a press fit?
    the 144mm housings i got the liner is a little tighter and at least grabs the housing whats the story sbt?
    cheers

  • #2
    Re: new sbt 155mm liner wear ring loose as falls st8 through

    The liner is more loose in the yamaha's than in the seadoo's.
    The impeller housing (housing 1) with the liner in it gets sandwiched between the Stator housing and the forward housing (housing 2). When it is bolted down the wear ring will not spin in the housing.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Re: new sbt 155mm liner wear ring loose as falls st8 through

      Exactly what I needed to know. Thx

      Comment

      Working...
      X