SBT Jetski Engines, Parts & Accessories

Results 1 to 4 of 4
  1. #1
    Joined
    Sep 2018
    From
    Denise.B.Diaz
    Posts
    1

    Default 750/780 owners help

    I bought a 780 hull and had a 750 motor in it actually. Got a good deal on it and it ran when I got it. Long story short, I cleaned the carbs, because it would only run if I was constantly moving the choke with the throttle.
    Ended up needing rebuild. Rebuilt whole crank and cylinders/Pistons and all. Diaphragms and all looked good in carbs. Put back together and now it seems like cylinder closest to the front of the ski donkey is getting warmer than the rest. Haven't temp shot it yet, and also if I give it WOT, it bogs. It's bored 0.75mm over and I cleaned carbs and turned jets all the way in and 2 complete turns out, for every one. Was told 1.5 but wanted to riches it up since I ran it lean last time resulting in a rebuild

  2. #2
    Joined
    Jul 2019
    From
    Ecuador
    Posts
    4

  3. #3
    Joined
    Jul 2019
    From
    Ecuador
    Posts
    4

  4. #4
    Joined
    Jul 2019
    From
    Ecuador
    Posts
    4

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 750/780 owners help PLEASE
    By Krevord92 in forum Polaris
    Replies: 0
    Last Post: 06-27-2016, 09:51 PM
  2. PWC Owners !
    By Bill O'Neal in forum Sea-Doo
    Replies: 4
    Last Post: 06-18-2002, 01:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •