Announcement

Collapse
No announcement yet.

few?s on a 97 xp

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • few?s on a 97 xp

    Fixing up my my buddys and in the process of re-aasembling i broke 1 screw off for the flywheel housing. All others are fine. Will this fly, or do i need to tear it all back apart and drill it out and replace?

    Permatex on the gasket, and loctite on the other bolts.

  • #2
    You will have some leakage over time if you do not, and the cover will warp. Drill it out.
    SBT Tech Support is here to help with your problems.
    We try to answer each question quickly and accurately.
    Please do not use Private Messaging for Tech Support, use the forums.

    Comment


    • #3
      Because you mentioned a gasket, I'm assuming that you are talking about the mag housing to engine connection/bolts, not the cover bolts. If that is the case, you can use Ultra Black as a sealant, and the housing should stay dry inside, providing the other bolts are secured correctly. Next time you have it apart, remove the broken bolt and repair it correctly.
      Bill O'Neal WCM
      <a href="http://www.watercraftmagic.com" target="_blank">www.watercraftmagic.com</a>

      Comment


      • #4
        Yes Bill, that's what i was referring to..guess i need to be more clear.

        Thanks

        Comment

        Working...
        X