If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
can a flywheel out of a 99 or later 951 still work on a 98 951?i have read they changed the ignition system in 99 but i thought you could use the same flywheel but had to just replace the magneto.
tom
There isn't a direct model year change over. The part number is stamped on the flywheel, or you can look at the magnet layout - as long as they match, you can use it.
SBT Tech Support is here to help with your problems.
We try to answer each question quickly and accurately.
Please do not use Private Messaging for Tech Support, use the forums.
I am pretty sure 99 is when they went to a set up to fire spark plugs individually instead of both at the same time, so no, 99 would not work in 98 unless you changed over the pick-up and MPEM as well.
the flywheel will work, but the magnet hub will not. the 99 has too many lumps on it.
If you are using 98 hub on 99 f/wheel, mark the pickup lump position in relation to the flywheel key slot and duplicate on the 99 f/wheel. The factory locator hole is different.
If the hub is broken on your ski, you can use a hub off an 800 as they are the same.
Comment