30 is fine then
Announcement
Collapse
No announcement yet.
Best carb cleaner
Collapse
X
-
Originally posted by 1fastski.com:
i use 2+2 not all are the same , some wont clean the dust off the shelf lol , just rememeber DO NOT spray the rubber parts in the carb they will deform , check your popoff its prob to high and thats why your motor was hard to start , 15 to 20 psi will help a lot ,
I set the pop off pressure to 19psi (it was 24psi) during my carb rebuild. It started right up the first time. The second time at the ramp was a little more difficult. Low speed was very rough. Idle was low. The third time I tried to start it, out on the lake, it would not start. I think it was flooded. I guess I have to pull them apart again and set the pop off back.
Comment
Comment