What readings should be found when testing a 580 (big magneto housing) cdi, rectifier and speed limiter? It can be done with a multimeter?
Announcement
Collapse
No announcement yet.
580 cdi testing
Collapse
X
-
Not all of it can be tested with a multimeter. Only the stator, and the wire looms. The ignition can be tested with an ignition tester.
What is your problem ?
A very common problem with that model 580 is a broken wire between the CDI and the coil. It won't look broken though, and may even test good until it wiggles.Bill O'Neal WCM
<a href="http://www.watercraftmagic.com" target="_blank">www.watercraftmagic.com</a>
Comment