torqe settings for carbs

[zoobydoo]

I am getting ready to put my carbs back on my 96XP , Do these need to be torqed , if so what are the torqe settings
Thanks :confused

[Bryan Glynn]

All external torque values are indicated in the appropriate Installation guides, found in our Technical section. On a Sea-Doo 800, they need to be at 16 ft. lbs. - and don't forget the Loctite!

[Bill O'Neal]

Zoobydoo,
To the best of my recolection, the torque for the carb bolts is 15ft/lbs. Always torque carbs bolts or nuts evenly to prevent warping the carb bases.