I'AM TRY TO REMOVE THE CYLINDER BLOCK OFF MY 951 MOTOR FOR A REBORE.I HAVE RMOVED THE HEAD BOLTS,NUTS AND STUDS BUT IT WON'T BUDGE. HAVE I MISSED SOMETHING ?. ANY HELP WOULD BE GREATLY APPRECIATED.
Announcement
Collapse
No announcement yet.
951 MOTOR HELP !
Collapse
X
-
You didn't say if it is in the hull or not. If it is in an XPL hull, you will need to remove the studs, as the clyinder will not come up high enough to clear the studs.
There are two locating pins between the clyinder and the case. The clyinder must come straight up to get off of the pins.Bill O'Neal WCM
<a href="http://www.watercraftmagic.com" target="_blank">www.watercraftmagic.com</a>
Comment
Comment